Fanvil i10V SIP Video Intercom

Fanvil i10V SIP Video Intercom
  • 2 SIP Lines
  • 2 DSS button
  • POE Enable
  • Support Peer to Peer Scenarios (Non IPPBX mode)
  • Full Duplex Speakerphone with noise reducation
  • Intelligent DSS keys (Speed Dial)
  • Wall Mount Installation
  • Action URL / Active URL
  • Network access authority authentication: 802.1x

DATASHEET: Check it now

USER MANUAL: Check it now

QUICK INSTALLATION GUIDE: Check it now

MOUNTING DIMENSIONS: Check it now

 

Generic

  • 2 SIP Lines
  • Auto answer
  • Intercom function

Intercom Function

  • Support customized DSS keys
  • Network Time Synchronization
  • Action URL / Active URL

Audio

  • Narrowband Codec: G.711a/u, G.729AB, iLBC
  • Wideband Codec: G.722, Opus
  • Full-duplex Acoustic Echo Canceller (AEC)
  • Voice Activity Detection (VAD) / Comfort Noise Generation (CNG) / Background Noise Estimation (BNE)
  • Packet Loss Concealment (PLC)
  • Dynamic Adaptive Jitter Buffer up to 300ms
  • DTMF: In-band, Out-of-Band – DTMF-Relay(RFC2833) / SIP INFO

Video (i10V)

  • Sensor: 1/4” color CMOS
  • 1 MegaPixel
  • Video coding: H.264
  • Resolution: 720P
  • Viewing angle: 90°
  • Minimum illumination: 0.1Lux

Networking

  • Physical: 10/100 Mbps Ethernet
  • IP Mode: IPv4/IPv6/IPv4&IPv6
  • IP Configuration: Static / DHCP / PPPoE
  • Network access authority authentication: 802.1x
  • VPN: L2TP / OpenVPN
  • VLAN
  • LLDP
  • QoS

Protocols

  • SIP2.0 over UDP/TCP/TLS
  • RTP/RTCP/SRTP
  • STUN
  • DHCP
  • LLDP
  • PPPoE
  • 802.1x
  • L2TP
  • OpenVPN
  • SNTP
  • FTP/TFTP
  • HTTP/HTTPS
  • TR-069

Deployment & Maintenance

  • Auto-Provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIP PNP/TR-069
  • Web Management Portal
  • Web-based Packet Dump
  • Configuration Export / Import
  • Firmware Upgrade
  • Syslog

Deployment & Maintenance

  • i10/i10V :1 DSS button (speed dial button)˗i10D:2 DSS button
  • 1 RJ45 port
  • 1 short circuit input interface
  • 1 relay: NC/NO Contacts, Max DC30V/1A, AC125V/0.5A
  • Active switching output: 12V/650mA DC
  • Power: DC12V/1A or POE
  • Housing material: ABS
  • Installation: Indoor installation
  • working temperature: -20 ~50 °C
  • Storage temperature: -20 ~ 50 °C
  • Relative humidity: 10% – 90%
  • Equipment Dimension: 88 x 88 x 31mm
  • Packing Dimension: 95x108x40mm
  • Outer CTN Dimension: 241x225x215mm (20 PCS)
  • Equipment weight: 135g

Write a review

Note: HTML is not translated!
    Bad           Good

Free Shipping

Create unlimited blocks with any content. Place them on any product page.

  • Brand: Fanvil
  • Product Code: Fanvil i10V
  • Availability: In Stock
  • HK$0.00
This product has a minimum quantity of 100