• Small and exquisite, can be embedded in the internal installation
• Emergency call button interface, active call
• Interact with IPC camera, you can make a video phone call
• NVR video recording, standard RJ45 interface
• Recording output, 3.5mm standard audio interface
• 10W-30W adaptive output power
• System online maintenance and management
• The PA2 has various functions and interfaces such as intercom, broadcast, video, security, recording.

DATASHEET: Check it now

USER MANUAL: Check it now

QUICK INSTALLATION GUIDE: Check it now

MOUNTING DIMENSIONS: Check it now

Fanvil PA2 SIP Paging Gateway

(SIP Logic in/out Gateway with audio in/out)

Fanvil PA2 brings the stability and audio quality of Fanvil VoIP phones to your paging system. A SIP-enabled gateway for paging and video, PA2 supports two SIP lines for voice broadcast over your IP network. It has a configurable audio output up to 30W. Extensive electrostatic protection provides high reliability.

Fanvil PA2 supports HD voice quality, it can be used as part of a video system and linking

For example, IP cameras to your network for HD video calls. The range of interfaces and options makes this a professional, customizable solution for your IP paging system. Power PA2 using PoE.

Fanvil PA2 SIP paging gateway Technical Specification

Intercom

• Two SIP lines, supporting SIP 2.0 (RFC3261) and related RFC
• Supports two lines RTSP
• Voice broadcast IP address
• Button or remote volume adjustment
• Switch signal input and output
• Talkback recording output
• Handsfree talking
• Default auto answer
• Dynamic multicast function
• Supports DC or POE power supply
• Support for Function key interface
• Support monophonic active speakers
• Network time synchronization
• Action URL / Active URI remote control
• Supports SRTP
• Support for HTTP / HTTPS web pages
• Support QoS: 802.1p / q, DSCP
• Support MD5 authentication
• Supports Web Filter
• DHCP / static / PPPoE
• STUN

Physical Specifications

• 2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE PoE: 802.3af (Class 3: 6.49 ~ 12.95W) Black: LAN port (Only connected to the original camera) Cable: Super five lines or better
• 1 blue indicator (SIP status and network status)
• 2 volume plus or minus key
• 1 restore factory settings key
• 1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance
• 1 ground screw
• 1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage. Wire diameter: 18 AWG or larger diameter, Interface:Pluggable terminal block
• 1 headset speaker： Output: 32 Ohm 1.2V interface: Pluggable terminal block
• 1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA Interface: pluggable terminal block
• 1-way microphone input interface: Recommendation: Use an electret condenser microphone Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V Interface: Pluggable terminal block
• 1 short-circuit input and output interface (built-in relay): Relay: MAX DC30V / 1A, AC125V / 0.5A, Interface:pluggable terminal block
• 2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm DC power seat 1 roadway 2Pin pluggable terminal block
• Standby power consumption: DC12V 1.32W / POE 1.78W
• Housing material: aluminium alloy shell
• Installation: Indoor installation
• Operating temperature: -30 ~ 70 ℃
• Storage temperature: -40 ~ 70 ℃
• Relative humidity: 10% – 95%
• Equipment size: 113x83x28mm
• Packing size: 138x108x77mm
• Equipment weight: 250g

Audio

• Narrowband speech coding: G.711a / u, G.723.1, G.726-32K, G.729AB
• Broadband speech coding: G.722
• Half Duplex Echo Cancellation (AEC)
• DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking Protocols

• Supports PoE (802.3af
• Primary and secondary DNS servers are supported
• Support VLAN
• Supports SNTP client
• Support VPN L2TP / PPTP / IPSec